University Park, Maryland
Epoxy floor repair and recoating in University Park, Maryland, for floors that are peeling, blistered, or worn: honest diagnosis first, then repair or a full recoat built on ground concrete.
Most failed epoxy floors in town trace back to the same short list: coating rolled over unground concrete, moisture that was never tested, or a thin kit that shrank and let go under hot tires. The symptoms are familiar too: peeling at the door line, blisters in the basement, and patches wearing back to bare slab.
Repair starts with diagnosis. We inspect the bond across the floor, test moisture, and tell you plainly whether a local repair will hold or whether the honest fix is grinding the failure off and recoating the system properly.
The right answer depends on how much of the floor is still bonded.
A recoat is a rebuild, not a cover up. Failed material comes off by grinding, the slab is repaired and tested, and the new system goes down in full sequence from primer to topcoat. That is the only version of a second chance that lasts.
Where the original floor is sound but worn, a screen and recoat of the topcoat alone can restore the finish. We will tell you which situation you are in and price the honest option.
A garage on Oakridge Road had a store bought coating peeling in sheets at both tire lanes, two years after it went down over unground concrete. We ground the failure off completely, repaired the exposed cracks, tested moisture, and installed a full flake system in its place. The owner finally has the floor the kit promised, built the way it had to be built.
Tell us what your current floor is doing, and we will inspect the bond and moisture and give you a straight repair or recoat recommendation.
Prefer to talk it through first? Send the form and we will call you back at the number you give us.